耦合效应下压力型锚索锚固机理的近似理论分析

为了更加精确地研究压力型锚索的锚固机理,基于锚索预应力与岩土体蠕变的耦合效应推导了锚索预应力方程。在此基础上根据Mindlin问题解,推导了耦合效应作用下锚索砂浆体的压应力和剪应力近似解,并考虑锚索预应力与岩土体蠕变之间的耦合效应进行了案例分析。研究结果表明:锚索预应力和砂浆体受到的应力峰值均按反幂函数随时间逐渐衰减并稳定;承压板的长宽比与压应力峰值之间存在正相关关系,与剪应力峰值之间存在负相关关系;岩土体的泊松比与应力峰值之间存在正相关关系。该成果丰富了压力型锚索锚固机理的理论研究,可为边坡锚固设计提供一定的理论依据。     

Sequence-Dependent Nanofiber Structures of Phenylalanine and Isoleucine Tripeptides

The molecular design of short peptides to achieve a tailor-made functional architecture has attracted attention during the past decade but remains challenging as a result of insufficient understanding of the relationship between peptide sequence and assembled supramolecular structures. We report a hybrid-resolution model to computationally explore the sequence–structure relationship of self-assembly for tripeptides containing only phenylalanine and isoleucine. We found that all these tripeptides have a tendency to assemble into nanofibers composed of laterally associated filaments. Molecular arrangements within the assemblies are diverse and vary depending on the sequences. This structural diversity originates from (1) distinct conformations of peptide building blocks that lead to different surface geometries of the filaments and (2) unique sidechain arrangements at the filament interfaces for each sequence. Many conformations are available for tripeptides in solution, but only an extended β-strand and another resembling a right-handed turn are observed in assemblies. It was found that the sequence dependence of these conformations and the packing of resulting filaments are determined by multiple competing noncovalent forces, with hydrophobic interactions involving Phe being particularly important. The sequence pattern for each type of assembly conformation and packing has been identified. These results highlight the importance of the interplay between conformation, molecular packing, and sequences for determining detailed nanostructures of peptides and provide a detailed insight to support a more precise design of peptide-based nanomaterials.     

Effects of Synthesis Conditions on the Formation of Si-Substituted Alpha Tricalcium Phosphates

Powders of α-TCP containing various amounts of silicon were synthesized by two different methods: Wet chemical precipitation and solid-state synthesis. The obtained powders were then physico–chemically studied using different methods: Scanning and transmission electron microscopy (TEM and SEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffractometry (PXRD), infrared and Raman spectroscopies (FT-IR and R), and solid-state nuclear magnetic resonance (ssNMR). The study showed that the method of synthesis affects the morphology of the obtained particles, the homogeneity of crystalline phase and the efficiency of Si substitution. Solid-state synthesis leads to particles with a low tendency to agglomerate compared to the precipitation method. However, the powders obtained by the solid-state method are less homogeneous and contain a significant amount of other crystalline phase, silicocarnotite (up to 7.33%). Moreover, the microcrystals from this method are more disordered. This might be caused by more efficient substitution of silicate ions: The silicon content of the samples obtained by the solid-state method is almost equal to the nominal values.     

API X52管线钢与Corus RQT 701超高强钢的焊接工艺

针对超高强钢在机械行业的广泛使用,焊接接头易出现淬硬脆化、裂纹等缺陷的情况,采用焊条电弧焊(SMAW)和药芯气体保护焊(FCAW-GS)组合的焊接方法,对API X52管线钢与Corus RQT 701超高强钢的焊接进行了工艺试验,并进行常规力学性能试验。结果表明,通过合理匹配焊接工艺参数,严格控制低热输入量及层间温度,实现了小熔合比的异种钢焊接,且焊接接头具有良好的力学性能,达到了标准和规格书的要求;异种高强钢焊接,采用SMAW打底焊接和FCAWGS填充并盖面的方法,焊接效率较单纯采用焊条电弧焊工艺提高2倍以上。     

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

风洞模型加速度负反馈振动主动控制方法研究

针对尾撑式风洞模型强方向性振动问题,基于异位配置加速度负反馈控制器对风洞模型振动主动控制方法进行研究。首先,通过模态分析得到系统低阶模态振动的强方向性并基于系统特性设计了具有结构耦合性的内嵌压电陶瓷作动器的风洞模型振动主动控制系统。然后,基于异位配置NAF控制器分别设计了针对第二阶模态和前两阶模态的单模态NAF控制算法和双模态NAF控制算法。最后,进行了实验验证,结果表明:双模态NAF控制算法控制效果较好,前两阶模态阻尼比分别提高近13倍和近40倍,镇定时间分别缩短近11s和近26s。     

一种液压摩擦焊机电液系统研究与试验

针对海上石油平台、海底输送管线维修的需要,提供了一种液压摩擦焊机液压和电器系统设计思路,通过参数计算、电液控制系统设计,研发了一种液压摩擦焊机,通过对DH38钢摩擦叠焊单元成型工艺试验,发现焊接接头拉伸强度达到了母材强度的76%以上,验证了液压摩擦焊机的可靠性能,通过该研究的应用,可对海上石油平台、海底输送管线的维修起到积极作用。     

细粒尾矿综合利用技术研究

姑山矿业公司为提高细粒尾矿的综合利用率，研究分析了细粒尾矿的性质，系统研究了尾矿含量、煅烧工艺制度对不同成分体系尾矿陶粒堆积密度、表观密度、空隙率、吸水率、筒压强度及软化系数的影响。研究得出了全尾矿陶粒、细粒尾矿+污泥陶粒、细粒尾矿+污泥+粉煤灰陶粒3种成分体系的尾矿陶粒较优的尾矿含量及煅烧工艺制度，且3种尾矿陶粒均可代替石头用作粗集料。     

Joining of dense Si3N4 ceramics with tape cast Lu-Al-Si-O-N interlayer

Lu-Al-Si-O-N tapes with different thickness were used to join gas pressure sintered Si₃N₄ ceramics. The microstructure of the joints and the influences of the joint thickness and joining temperature on the bonding strength of the as-joined Si₃N₄ ceramics have been investigated. The highest bonding strength about ~ 300 MPa of the joined specimens was achieved by using 450 µm interlayer at 1450 °C. The existence of Si₃N₄ nanowires was beneficial for the improvement of the bonding strength by interweaving the oxynitride glass matrix in the joint region.